Warranty durations
run from the date of documented purchase
(the
day of purchase by the end user).
All returns must be accompanied by original
sales receipt.
AST shall not be liable for any injury,
loss or damage, consequential or special, arising out of the use
of, or the inability to use the product.
AST Products carry a 5 year warranty with the exceptions stipulated below:
Sockets marked “For Hand Use Only”, will not be warranted if damaged by use with a Power Tool.
Electronic Tools have a 2 year warranty.
Sets and Kits: If only one item is defective, that item will be replaced, not the entire set. If only a part on a tool is defective, (i.e. gasket, rubber band, etc.) only the part will be replaced.
Cooling System Adapters with plastic tester attachment piece; may be repairable for a nominal fee.
Defective Products should be sent freight prepaid to AST for inspection. Warranty is handled by replacing the defective item. AST will only cover UPS/Ground return shipping, to the customer, for warranty items.
Stud Removers- AST Stud Removers produced between 2000–2008 are under warranty. If the external body is damaged please return the Stud Remover for warranty.
If only the internal parts of the Stud Remover need replacing, simply call and specify the AST product number of the Stud Remover. If the production date is in the range of 2000–2008, we will send out internal replacement parts at no charge.
Internal Stud Remover parts are replaceable. The following list indicated replacement numbers for the internal parts.
Internal Replacement Parts for Stud Removers |
|
Contains All Internal Parts
|
Warranty
Policy
AST tools are warranted against defects in WORKMANSHIP or
MATERIALS for a period of five years. Excluded are: (cutting
tools, screwdriver/bits, pressure gauges, dial indicators,
measuring tools, etc.) All warranty items need a return goods
authorization number and are to be shipped freight prepaid
to the following address:
Assenmacher Specialty
Tools, Inc.
6440 Odell Place
Boulder, CO
80301 • USA
Include name,
address, telephone number and a short description of
the problem. All items returned will be inspected and,
if found defective, will be either repaired or replaced
at the option of the manufacturer. |
6mm |
60 |
8mm |
80 |
10mm |
100 |
12mm |
120 |
1/4" |
250 |
5/16" |
312 |
3/8" |
375 |
7/16" |
437 |
1/2" |
500 |
9/16" |
562 |
5/8" |
625 |
|
